Holes for Rotopax mount, for 1 gallon Rotopax fuelor watercan.
Easy and seamless integration with pannier racks (Touratech pannier racks, KTM pannier rack (part No. 76512920000), Happy Trail pannier rack, Wolfman side racks, Tusk pannier racks, Rally Raid side racks, Vanasche motorstports rack - two sets of aluminium spacers are provided - one for rack alone and other for using luggage rack with pannier racks.
Perfectly sized - doesn't stick out - less chance to hurt rider in case of fall. In case of need, it is easy to expand capacity of the rack by adding bolt-on Extension plate.
Three 8 mm holes for RAM mount (GoPro or other action cameras)t, one on the back and two on the sides.
All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminum washers provided.
High quality powder coating - matte black.
Only 1.3 kg, including all mounting hardware.
EXTENSION PLATE FOR HUSQVARNA 701 LUGGAGE RACK
Thirty nine slots - strapping points for all kind of soft luggage, tool bags or small roll bags, Extended top surface - approx.
302 (W) x 196 (L) of completely flat top surface (plus flanges for easy strapping), Strap-friendly - chamfered, smooth edges of the Extension plate and slots, Holes for Rotopax mount, for 1 gallon Rotopax fuelor watercan, Strong and safe
- made of 4 mm aluminum (AlMg3 H22 - 5754) with side flanges bent downwards for added strength and rider protection, Eight 8 mm holes for RAM mount (GoPro or other action cameras),
All necessary hardware provided - high quality 10.9 zinc coated bolts, washers and nuts, High quality powder coating - matte black or matte white.
Upper bolt caps(qty. 2) are made of AISI 4140 steel, heat treated (for added strength) then zinc coated (rust protection). That makes them virtually indestructible. Size of the head is standard – 27 mm, same as front axle nut. There is M6 threaded hole for OEM bolt holding plastic fairing. Bolt cap is designed to be slim so plastic fairing is not sticking out more then it does when OEM upper bolt is used.
Upper bolts (qty. 2 + optional 2) are 12.9 machine bolts, zinc coated. These are much stronger then OEM upper tank bolts. 25 mm long, so 15 mm is threaded into the bolt cap, when properly torqued. NOTE: in kits for 2014-2016 bikes additional button head bolts are provided - those are for Husqvarna 701 bikes.
M6 small washers(qty. 2)are standard M6 steel zinc coated washers. These are used with OEM M6 bolts, that holds side fairings and bolts into the upper bolt cap.
Lower bushings (qty. 2) are made of strong plastic - polyamide with molybdenum, much stronger then OEM rubber lower bushings, yet gentle enough to be in close contact with plastic tank (rubber OEM upper bushings are kept, because completely rigid tank-frame connection wont be a good thing). Slightly different size, so they fit better.
Sleeve(qty. 1) is made of AISI 304 stainless steel, without internal thread.
Lower bolt (qty. 1) design is only difference between kit for 2008-2013 and 2014-on bikes. For 2008-2013 bikes high quality M8x140 allen head 12.9 zinc coated bolt is provided. For 2014-on bikes custom M8x154 mm hex head 10.9 zinc coated bolt is provided.
Washers (qty. 1) are standard large M8 steel zinc coated washers andnut(qty. 1) is standard M8 steel zinc coated safety nut.
SIDE RACK PLATE
Platform for various soft bags or panniers, Rotpax fuel cell, Tool tube and more.
Available as single plate or pair.
platform for various soft bags and saddle bags - perfect match for Wolfman Expedition Dry Saddle bags or Rocky Mountain Saddle bags - slots are made to fit with Wolfman strap clips,
easy mounting of Kriega rack loops -for attaching Kriega US bags (disclaimer: Kriega US range is not designed to be used as pannier bags),
chamfered edges - safe for straps,
platform for Rotopax 1 gallon fuel or water can - four positions for Rotopax mount (mount not included),
made of 4 mm aluminum, powder coated to black,
mounting hardware provided - six high quality steel zinc coated Wurth clamps and necessary 10.9 button head bolts, nuts and washers,