Regular price€99.84 - ex. vat
Save €-99.84 - ex. vat
Kit consist of upper and lower assembly.
Upper bolt caps(qty. 2) are made of AISI 4140 steel, heat treated (for added strength) then zinc coated (rust protection). That makes them virtually indestructible. Size of the head is standard – 27 mm, same as front axle nut. There is M6 threaded hole for OEM bolt holding plastic fairing. Bolt cap is designed to be slim so plastic fairing is not sticking out more then it does when OEM upper bolt is used.
Upper bolts (qty. 2 + optional 2) are 12.9 machine bolts, zinc coated. These are much stronger then OEM upper tank bolts. 25 mm long, so 15 mm is threaded into the bolt cap, when properly torqued. NOTE: in kits for 2014-2016 bikes additional button head bolts are provided - those are for Husqvarna 701 bikes.
M6 small washers(qty. 2)are standard M6 steel zinc coated washers. These are used with OEM M6 bolts, that holds side fairings and bolts into the upper bolt cap.
Lower bushings (qty. 2) are made of strong plastic - polyamide with molybdenum, much stronger then OEM rubber lower bushings, yet gentle enough to be in close contact with plastic tank (rubber OEM upper bushings are kept, because completely rigid tank-frame connection wont be a good thing). Slightly different size, so they fit better.
Sleeve(qty. 1) is made of AISI 304 stainless steel, without internal thread.
Lower bolt (qty. 1) design is only difference between kit for 2008-2013 and 2014-on bikes. For 2008-2013 bikes high quality M8x140 allen head 12.9 zinc coated bolt is provided. For 2014-on bikes custom M8x154 mm hex head 10.9 zinc coated bolt is provided.
Washers (qty. 1) are standard large M8 steel zinc coated washers andnut(qty. 1) is standard M8 steel zinc coated safety nut.
Regular price€1,221.31 - ex. vat
Save €-1,221.31 - ex. vat
The KTM 690 ADVENTURE-R FAIRING KIT is a kit for all users who want to turn their KTM 690 Enduro into a real Adventure-Bike Read here:
👉Possibility to request configuration for the original ktm 690 sides
👉Fuel tanks are not included and must be purchased from Rally Raid Products
THE KIT IS COMPOSED OF:
CNC Navigation tower
White ABS Side panels
No-drill connection system
Plate for nav-system
The navigation tower is supplied pre-assembled COLOR: The kit is supplied in plasticized black OPTIONAL: Scotts / Öhlins PIN machined CNC , VisionX LED Lights Kit (additional), Radiator protection in aluminum, Complete Graphic kit, Polisport front fender, Direction indicators, USB socket
WARNING: All images contained on the website www.specialthings.it are purely indicative, therefore our company reserves the right to make changes to the products without any prior notice. The use of the kit for purposes other than specified is prohibited. MST Srl is not held responsible for any damage resulting from improper, erroneous or unreasonable use or failure to comply with the assembly instructions.
GRAPHICKIT.690 - Graphics kit for KTM690 Adventure-R Kit
Beautiful sticker kit to embellish your KTM690 equipped with our kit. Select the graphics you prefer from the models on the side. Once the order is complete, please write to us telling us the model you prefer.
690.BFF - Billet Fuel Filler 690
Regular price€169.00 - ex. vat
Save €-169.00 - ex. vat
Fuel Filter Socks by Profill are now available!!
Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system?
Your solution is right here with this CNC part machined from a single piece of billet aircraft grade aluminum with an anodized finish.
The kit includes all necessary mounting hardware as well as a fuel cap in your choice of Black Plastic from Acerbis or Machined Billet Cap in matching color.
This unit retains the stock venting location however it is simple to plug this port and utilize the vent atop the fuel cap if desired.
The stock OEM O-ring will be reused when installing this unit.
Fuel Filter Socks are made by Profill out of Australia.
They are mounted in the filler neck between body and fuel cap for super easy installation and removal.
Fitment: KTM 690 All Years
690.FT.EX - Side Stand Foot Extension 701/690
Regular price€110.00 - ex. vat
Save €-110.00 - ex. vat
A two-piece part that combines a thin plate of laser cut steel, powdercoated in black, along with a machined piece of billet aluminum to give you more surface area to better support the bike.
Particularly useful in dirt/mud/sand environments where the substrate is softer.
One of the machined flats is parallel (in contact) with the ground surface when the bike is tipped up using the kickstand for field changing tires.
Fitment: KTM 690 All Years Husqvarna 701 All Years.
690.CTSP - COUNTERSHAFT PROTECTION
Regular price€136.55 - ex. vat
Save €-136.55 - ex. vat
CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cylinder.
In addition to the protection it also provides a window to view your front sprocket condition and access to clean/remove debris unlike the stock cover.
Each case saver comes with proper OEM KTM hardware and a KTM chain slider.
KTM 690 Enduro & SMC (Fits all years)
Husqvarna 701 Enduro & SM (Fits all years)
Fits with Rekluse Slave (yes, you can adjust the slave with the case saver mounted in place)
Fits with SiguTech Slave
Does NOT fit with AKRAPOVIC header pipe.
This header has an extra exhaust tab that uses one of the mounting points of the case saver. (Akrapovice Slip On is Fine)
Maximum Front Sprocket
Size: 16 Teeth
EVO2.FT - EVO2 Fuel Tank Kit
Regular price€1,350.00 - ex. vat
Save €-1,350.00 - ex. vat
Prestigious tank kits for KTM 690 Enduro produced by Rally Raid Products. Rally Raid Products EVO2 tanks have been designed with sophisticated CAD systems. They are compatible with all KTM 690 Enduro models. They guarantee an extra 10 liters of fuel, ideal for longer trips or raid adventure.