The Dirt Tricks KTM Rear Sprocket was designed and patented by Dirt Tricks president and engineer Greg Burns in 2002, using his knowledge of aerospace steels, heat treatments, as well as FEA stress analysis.
Being an expert desert racer, Greg became tired of changing aluminum sprockets every two months.
His goal was to create a sprocket that would last an entire season of hard riding, yet be comparable in weight to aluminum.
Thus, the Dirt Tricks sprocket was born.
It required two years of development and testing, but the end result has proven to be the toughest, most durable off-road sprocket available.
The 48 tooth rear is my preferred sprocket for the 701.
Gears the bike down enough for semi-technical offroad but still leaves the bike enough room at the top to clip along at Highway speeds. Unfortunately the stock chain is not long enough to accommodate a 48 tooth sprocket so you will require a new chain.
The 120 link Regina chain will suit your needs.
One year wear guarantee: if you wear it out, we will replace it! Chromoly steel is 2.5 times stronger than stainless steel Machined to the tightest industry standards and tolerance Heat treated, nickel/chrome plated, and laser etched Unique “minimalist” design and appearance A 48 tooth sprocket only weighs 18oz KTM Standard Rear Sprocket Fitment: KTM: ’91-Current All 2-stroke models 125cc and up ’99-Current All 4-stroke models 250cc to 690cc Husaberg: ’00-’14 All models Husqvarna: ’14-Current All KTM based models Zirconium: Our new Dirt Tricks Special Edition Zirconium sprockets are 2oz lighter than our chrome plated design, and are comparable to most of the performance aluminum sprockets and lighter than the twin metal designs available.
The new coating on these sprockets reduces friction up to 50%, increases durability, and looks sharp!
Our Special Edition sprockets will outlast any sprocket on the market, and we back that up with our 2 year guarantee.
The KTM 690 ADVENTURE-R FAIRING KIT is a kit for all users who want to turn their KTM 690 Enduro into a real Adventure-Bike Attention: Possibility to request configuration for the original ktm 690 sides
THE KIT IS COMPOSED OF:
CNC Navigation tower
White ABS Side panels
No-drill connection system
Plate for nav-system
The navigation tower is supplied pre-assembled COLOR: The kit is supplied in plasticized black OPTIONAL: Scotts / Öhlins PIN machined CNC , VisionX LED Lights Kit (additional), Radiator protection in aluminum, Complete Graphic kit, Polisport front fender, Direction indicators, USB socket
WARNING: All images contained on the website www.specialthings.it are purely indicative, therefore our company reserves the right to make changes to the products without any prior notice. The use of the kit for purposes other than specified is prohibited. MST Srl is not held responsible for any damage resulting from improper, erroneous or unreasonable use or failure to comply with the assembly instructions.
Graphics kit for KTM690 Adventure-R Kit
Beautiful sticker kit to embellish your KTM690 equipped with our kit. Select the graphics you prefer from the models on the side. Once the order is complete, please write to us telling us the model you prefer.
Billet Fuel Filler 690
Fuel Filter Socks by Profill are now available!!
Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system?
Your solution is right here with this CNC part machined from a single piece of billet aircraft grade aluminum with an anodized finish.
The kit includes all necessary mounting hardware as well as a fuel cap in your choice of Black Plastic from Acerbis or Machined Billet Cap in matching color.
This unit retains the stock venting location however it is simple to plug this port and utilize the vent atop the fuel cap if desired.
The stock OEM O-ring will be reused when installing this unit.
Fuel Filter Socks are made by Profill out of Australia.
They are mounted in the filler neck between body and fuel cap for super easy installation and removal.
Fitment: KTM 690 All Years
Side Stand Foot Extension 701/690
A two-piece part that combines a thin plate of laser cut steel, powdercoated in black, along with a machined piece of billet aluminum to give you more surface area to better support the bike.
Particularly useful in dirt/mud/sand environments where the substrate is softer.
One of the machined flats is parallel (in contact) with the ground surface when the bike is tipped up using the kickstand for field changing tires.
Fitment: KTM 690 All Years Husqvarna 701 All Years.
CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cylinder.
In addition to the protection it also provides a window to view your front sprocket condition and access to clean/remove debris unlike the stock cover.
Each case saver comes with proper OEM KTM hardware and a KTM chain slider.
KTM 690 Enduro & SMC (Fits all years)
Husqvarna 701 Enduro & SM (Fits all years)
Fits with Rekluse Slave (yes, you can adjust the slave with the case saver mounted in place)
Fits with SiguTech Slave
Does NOT fit with AKRAPOVIC header pipe.
This header has an extra exhaust tab that uses one of the mounting points of the case saver. (Akrapovice Slip On is Fine)
Maximum Front Sprocket
Size: 16 Teeth
Rally Raid Products
EVO2 Fuel Tank Kit
Prestigious tank kits for KTM 690 Enduro produced by Rally Raid Products. Rally Raid Products EVO2 tanks have been designed with sophisticated CAD systems. They are compatible with all KTM 690 Enduro models. They guarantee an extra 10 liters of fuel, ideal for longer trips or raid adventure.