The KTM 690 ADVENTURE-R FAIRING KIT is a kit for all users who want to turn their KTM 690 Enduro into a real Adventure-Bike Attention: Possibility to request configuration for the original ktm 690 sides
THE KIT IS COMPOSED OF:
CNC Navigation tower
White ABS Side panels
No-drill connection system
Plate for nav-system
The navigation tower is supplied pre-assembled COLOR: The kit is supplied in plasticized black OPTIONAL: Scotts / Öhlins PIN machined CNC , VisionX LED Lights Kit (additional), Radiator protection in aluminum, Complete Graphic kit, Polisport front fender, Direction indicators, USB socket
WARNING: All images contained on the website www.specialthings.it are purely indicative, therefore our company reserves the right to make changes to the products without any prior notice. The use of the kit for purposes other than specified is prohibited. MST Srl is not held responsible for any damage resulting from improper, erroneous or unreasonable use or failure to comply with the assembly instructions.
Billet Fuel Filler 690
Fuel Filter Socks by Profill are now available!!
Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system?
Your solution is right here with this CNC part machined from a single piece of billet aircraft grade aluminum with an anodized finish.
The kit includes all necessary mounting hardware as well as a fuel cap in your choice of Black Plastic from Acerbis or Machined Billet Cap in matching color.
This unit retains the stock venting location however it is simple to plug this port and utilize the vent atop the fuel cap if desired.
The stock OEM O-ring will be reused when installing this unit.
Fuel Filter Socks are made by Profill out of Australia.
They are mounted in the filler neck between body and fuel cap for super easy installation and removal.
Fitment: KTM 690 All Years
Side Stand Foot Extension 701/690
A two-piece part that combines a thin plate of laser cut steel, powdercoated in black, along with a machined piece of billet aluminum to give you more surface area to better support the bike.
Particularly useful in dirt/mud/sand environments where the substrate is softer.
One of the machined flats is parallel (in contact) with the ground surface when the bike is tipped up using the kickstand for field changing tires.
Fitment: KTM 690 All Years Husqvarna 701 All Years.
CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cylinder.
In addition to the protection it also provides a window to view your front sprocket condition and access to clean/remove debris unlike the stock cover.
Each case saver comes with proper OEM KTM hardware and a KTM chain slider.
KTM 690 Enduro & SMC (Fits all years)
Husqvarna 701 Enduro & SM (Fits all years)
Fits with Rekluse Slave (yes, you can adjust the slave with the case saver mounted in place)
Fits with SiguTech Slave
Does NOT fit with AKRAPOVIC header pipe.
This header has an extra exhaust tab that uses one of the mounting points of the case saver. (Akrapovice Slip On is Fine)
Maximum Front Sprocket
Size: 16 Teeth
Rally Raid Products
EVO2 Fuel Tank Kit
Prestigious tank kits for KTM 690 Enduro produced by Rally Raid Products. Rally Raid Products EVO2 tanks have been designed with sophisticated CAD systems. They are compatible with all KTM 690 Enduro models. They guarantee an extra 10 liters of fuel, ideal for longer trips or raid adventure.
This Husqvarna 701/690 Rally Bashplate is made out of Laser-Cut Aluminium and TIG Welded to provide maximum protection with a limited weight.
It features also an added protection for the Rear Brake Cylinder.
Last but not least it comes with a polythene moulded water or fuel reserve.
Weight: 2.9 Kg
Enduristan Tool Pack Roll
Enduristan Tool Pack
From Europe's best selling extreme soft luggage brand.
Used and relied upon by motorcycle adventurers around the globe today.
With a host of genuinely useful innovative features the Enduristan Tool Roll is a step above the rest.
It folds out to create a large bright red mat which helps you keep track of all the removed motorcycle parts.
With a incorporated magnetic patch that measures 11x19cm you won't loose small removed parts as you work on your bike.
The Tool Pack comes with two silicone bit blocks holding 6 bits each.
The bit blocks feature a white 3D Enduristan logo and a velcro backside to firmly attach them inside the pack.
Comes with a large range of elastic holding loops for spanners, allen keys, extensions and drivers.
It has an internal zipped pocket with heavy duty mesh for storing loose tools and bits, and it has an additional internal pocket inside for cable ties and tape.
The outside pull strap with spanner logo is designed for fast recognition and quick access.
The whole thing is secured with a simple and reliable secure velcro closing.
Washable and easy to clean the Enduristan Tool Pack is made to last.
Specification Weight: 402g Size Folded: 20 x 13.5 cm Size Unfolded: 45 x 78 cm Fittings List: 56 elastic loops, 2 rubber tool bit holders, 2 large areas for dismounted parts, 1 additional magnetic area of 11 x 19 cm, 1 open inside pocket, 1 zipper mesh pocket for small items.
Tools not included.
If you need help or advise about any of our products please just call or email, our team are always here to help.